Sale!

Levis Ambiance Mur – Extra Matt – Shell White

High quality extra matt acrylic paint. Applicable on interior walls and ceilings.

From  20,95 (incl. tax)

  • 1130 - Shell White
Clear
  • Delivered within 2 days.
  • Free shipping on orders above € 150,-.
Qty Brush/roller or spray? Max. surface
1 (1l.) Min. consumption brush/roller: 12 m2/lt 12m2
1 (1l.) Min. consumption spray typical DFT: m2/lt 0m2

Description

Ambiance Mur Extra Matt Mix

High quality extra matt acrylic paint. Can be colored on the mixing machine.

Application

Applicable on walls and ceilings. For indoor use.

Properties

  • Long-term color retention due to the addition of a special additive.
  • Excellent hiding power and stain insulating (eg nicotine stains).
  • Good washability and stain resistant.
  • Doesn’t splash and is easy to apply without sticking.
  • This product is solvent-free.
  • The new HD Color formula offers unique protection against UV rays and other wear. This way you can enjoy your Levis Ambiance color choice for an extra long time.

Aspect

Extra matte.

To colour

Available in a wide range of colors on the mixing machine.

Also available in white and 54 other ready-made colours.

Packaging

1l, 2.5l, 5l and 10l

Available in 3 bases: Base White, Base Medium and Base Clear. Depending on the desired color, the base suitable for this color will be used in the store.

Product description

Stir well before use. Processing with brush and roller. ready to use.

Processing temperature between 10 °C and 25 °C.

Cleaning tools with lukewarm water and soap.

Efficiency

± 12m²/l per layer

Drying time

Dust dry: 1 hour.

Can be painted over: 4 to 5 hours.

For stubborn stains (soot, nicotine,…): apply the 2nd layer only after 24 hours.

Substrates & Systems

Plaster, plasterboard, cement cladding, brick, wallpaper, raw concrete, aerated concrete, concrete blocks, fiberglass, …

Preparation of new surfaces

• Plaster, plasterboard, wallpaper, fiberglass .

Clean the surface and make it dust-free. If applicable: cracks and cracks and holes fill with a suitable Polyfilla product. If necessary, lightly sand the surface (eg.

plaster) and thoroughly dust off.

Then apply 1 layer Ambiance Murprimer. Use Levis Primer Mur & Ceiling Gray for a pure red or burgundy finish and Levis Primer Mur & Ceiling Ocher Yellow for a pure yellow or orange finish. In case of non-coherent or powdery surfaces, Levis

Stain-covering Primer recommended as a primer instead of the above-mentioned primers.

• Cement occupancy, brick, raw concrete, aerated concrete, concrete blocks.

Dust the substrate. Apply 1 layer Ambiance Murprimer. If you choose a pure red or burgundy finish one coat Levis Primer Mur & Ceiling Gray apply. If you opt for a pure yellow or orange finish, a layer of Levis Primer

Apply Mur & Ceiling ocher yellow.

If the surface still powders after dedusting, 1 layer of Levis Stain Covering Primer apply instead of the above primers.

Processing

Substrates and instructions for use

Preparation for renovation

• Priming is usually not required on old coats in good condition if properly prepared.

• If applicable: fill cracks and cracks and holes with a suitable Polyfilla product.

• Sand off poorly adhering paint. Then dust off.

• Wash/degrease well-adhering old layers with ammonia water (9 parts water and 1 part ammonia). Sand and dust if necessary.

• In case of chalking or powdering old paint layers 1 layer of Levis Stain Covering Primer apply.

• In case of soot or nicotine stains, apply 1 layer of Levis Stain Covering Primer.

• Be sure to apply a primer to the bare and repaired areas (see new surfaces).

Finish

Apply 2 coats Ambiance Mur Extra Mat Mix.

Safety

  • Avoid contact with eyes and skin. Keep out of reach of children.
  • Do not throw waste into the sink.
  • VOC content
  • This product contains a maximum of 3 g/l VOC. EU limit value for this product (category A/a): 30 g/l (2010).

Storage

Reclose can well. Store frost-free.

Security and Storage

This technical record, dated 1-10-2019, cancels and replaces all previous editions. This technical data is based on own knowledge and experiments and are provided to you as a guideline. However, this does not imply any formal liability for use of our products. Always ask our services whether there is no new index card of recent date.

Additional information

Gloss Level

Extra Matt

Packaging

1L, 2,5L, 5L

Color

Positioning

Indoor

Product type

Room Type

Bedroom, Dining room, Hall, Kitchen, Living room, Nursery, Office

Surface Description

Aerated concrete blocks, Brick & Cement, Cement, Concrete, Fiberglass coatings, Fibreboard, Plasterboard (ie. Gyproc), Wallpaper

Brand

User

Non-Professional

Components

Single pack

Solvent

Water based

Type of structure

Ceiling, Wall

Detailed information about Levis Ambiance Mur – Extra Matt – Shell White

Volume1
VOCWater based gr/lt
Theor m2/lt at average DFT12 m2/lt
Min. consumption brush/roller m2/lt12 m2/lt
Drying time (25C)4 - 5 hr hrs

Downloads

Product name Document name Document type Document language Document download

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Levis Ambiance Mur – Extra Matt – Shell White”

Your email address will not be published. Required fields are marked *