Stelpant PU Zinc rich Primer (3,5L -10L)


(0 customer reviews)

From  168,58 (incl. tax)


Product description:

Stelpant PU Zinc is a one component moisture curing zinc rich coating based on polyurethane. The product has a low solvent content, has an excellent long-term corrosion protection, it is surface-tolerant, and can be applied at high film thickness. Stelpant PU-Zinc can also be applied during normal adverse weather conditions, at temperatures of from -5 ° C to 50 ° C and a relative humidity of no less than 98%.

  • Best performing universal marine primer on inland ships
  • Fast and easy to bring in four seasons = high quality
  • Over > 30 Years credentials Maritime climate
  • Very gigh Durability
  • Directly applied to fixed rust
  • Compatible with most 1 & 2 component coatings

Additional information

Weight N/A




Market Segment

Bridge & Highway, Commercial & Architectural, Food & Beverage, Hydro, Marine, Marine infrastructure, Metals & Mining, O&G Midstream, OEM, Oil & Gas Upstream, Petrochemical, Pharmaceutical, Power – Conventional, Power – Nuclear, Power – Thermal Fuel, Protective Coatings, Protective Coatings, Pulp & Paper, Rail, Water & Wastewater, Waterproofing


Carbon Steel


Solvent Based


Industrial Coatings, Marine Coatings

ISO 12944 Durability

High, Very High

ISO 12944 Environment

C5, Cx

Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


UV resistance - Low (*) to High (*****)


Surf Prep New Steel

Sa2, Sa2.5, Sa3



Compatible with

1 component, 2 component


Primer, Steel Primer

Detailed information about Stelpant PU Zinc rich Primer (3,5L -10L)

Intended usesStelpant PU Zinc is a Primer for coating systems (with suitable topcoats) for objects with an extended life. Such as hydraulic steel structures, ships, offshore platforms and equipment, petrochemical and industrial plants, bridges, power plants, etc .. Stelpant PU Zinc show on surfaces made of corrosion or rust.
Volume solids71%
VOC255 gr/lt
Max. DFT100 µm
Min. DFT50 µm
Theor m2/lt at average DFT8,90 m2/lt
Typical DFT80
Min. consumption brush/roller m2/lt8,01 m2/lt
Min. consumption spray m2/lt typical DFT5,34 m2/lt
Drying time (25C)4 hrs
Drying time (10C)7 hrs
Min. application temp.-5°C
Max. operating temp.140°C (dry heat) or 60°C (wet heat)


Product name Document name Document type Language Download
Stelpant PU Zinc rich Primer (3,5L -10L) PDS Stelpant PU Zinc Rich Primer Product Data Sheet English Download

You may also like…


There are no reviews yet.

Show reviews in all languages (1)

Be the first to review “Stelpant PU Zinc rich Primer (3,5L -10L)”

Your email address will not be published.