Description
A low VOC, high build two-component, high solids surface tolerant epoxy maintenance coating.
For use as an anticorrosive primer for decks, deck fittings, topsides, superstructures, boottops, cofferdams, void spaces, underwater hull and wet spaces.
A low VOC, high build two-component, high solids surface tolerant epoxy maintenance coating.
Weight | N/A |
---|---|
Choose Packaging | |
Brand | |
Pick Color | |
Composition | |
Product type | 2C Abrasion Resistant Epoxy, 2C Epoxy Pirmer/Finish, 2C Epoxy Primer, Deck Coatings |
Coating, Lining or PFP | Coating |
Market Segment | |
End Use | Accommodation, Accomodation Interior, Bilges, Bulwark, Cargo Tank (alu), Cargo Tank (red), Cofferdam, Deck, Engine room, Engines & Compressors, Flanks & Underwater Hull, Hatch Coaming, Insulated & Uninsulated Piping & Equipment, Insulated storage tank, Living quarter, Non-Ferro on deck, Topside, Valves, Void spaces, Water Ballast Tank, Wet void spaces |
Substrate | Carbon Steel, Hot Dip Galvanized, Painted (2 component), Primed Steel |
Solvent | |
Layer | |
Surf Prep New Steel |
Intended uses | For use on a variety of substrates including hand prepared rusty steel, sandblasting and hydro-blasted steel and a wide range of intact, aged coatings. Provides excellent anti-corrosive protection in industrial plants, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion. |
---|---|
Volume solids | 82% |
VOC | 240 gr/lt |
Max. DFT | 250 µm |
Min. DFT | 100 µm |
Theor m2/lt at average DFT | 6,56 m2/lt |
Typical DFT | 125 |
Min. consumption brush/roller m2/lt | 5,90 m2/lt |
Min. consumption spray m2/lt typical DFT | 3,94 m2/lt |
Drying time (25C) | 18 hrs |
Drying time (10C) | 26 hrs |
Min. application temp. | 10°C |
Max. operating temp. | ? |
Product name | Document name | Document type | Language | Download |
---|
Reviews
There are no reviews yet.