COATING SYSTEM – 2 COMPONENT – SUPER HIGH GLOSS

CHOOSE PACKAGING, COLOUR AND VOLUME FOR EACHT ITEM. 

2 component Epoxy & Polyurethane

Choose Packaging
Pick Color
  • Red
-
+
Choose Packaging
Pick Color
  • YHA 216 Royal Blue
  • YHA183 Platinum
  • YHA184 Mediterranean White
  • YHB 663 Jade Mist Green
  • YHE294 Chilli Red
  • YHF 991 Mauritius Blue
  • YHK990 Flag Blue
  • YHS 299 Rochelle Red
  • YHS 936 Lauderdale Blue
  • YHS056 Fighting Lady Yellow
  • YHS070 Cream
  • YHY 999 Jet Black
  • YKB000 Snow White
-
+

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminents such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

Layer Product Name Generic Type Mix Ratio Min. Temp. Dry time @ 25°C m2/L brush m2/L spray Thinner
1st coat Intergard 269 2  comp. epoxy primer 16 : 4 5°C 8 hrs 10.5 7 GTA220
2nd & 3rd coat Perfection 2 comp. polyurethane 2:1 15°C 6 hrs 18 8 YTA910

 

Find the right application tools in the toolbox for solvent based coatings

Tips

  1. Do not apply or expose the paint below dew point, above 80% relative humidity, rain or temperatures below 10°C during application or drying.
  2. Make sure the mixing ratio is correct
  3. Wait at least 15min. after mixing before applying the paint
  4. Apply a stripe coat by brush on sharp edges, cavities such as pitting corrosion, in corners and difficult areas to reach by spray
  5. Do not overcoat a single component system with a 2 component system
  6. Respect to minimum and maximum overcoating time as per product data sheet

 

Always read the product technical data sheet and safety data sheet before using the coatings, to be found in the Download section.

 

 

 

 

Additional information

Weight 35 kg
Brand

End Use

, , ,

Gloss Level

Components

Compatible with

2 component

Substrate

, , ,

Budget - Low (*) to High (*****)

****

Productivity - Low (*) to High (*****)

**

Quality - Low (*) to High (*****)

****

Surf Prep M&R

, , , , ,

Surf Prep New Steel

,

UV resistance - Low (*) to High (*****)

*****

Industry

Systems

, , ,

Coating, Lining or PFP

Coating

Market Segment

Solvent

Product type

,

Layer

,

Detailed information about COATING SYSTEM – 2 COMPONENT – SUPER HIGH GLOSS

Intended usesHull, Deck - smooth, Deck - non-skid additive, Bilge/Lockers, Exterior cabin/trims, Interior cabin/trims, Aluminium / Zinc-Galvanised Steel, Epoxy Composite / Carbon Fibre, GRP / FRP, Steel, Wood
Volume solids47% and 52%
Max. DFT130 µm
Min. DFT90 µm
Chemistry2 component Epoxy & Polyurethane

Downloads

Product name Document name Document type Language Download
COATING SYSTEM – 2 COMPONENT – SUPER HIGH GLOSS PDS Intergard 269 Product Data Sheet English Download
COATING SYSTEM – 2 COMPONENT – SUPER HIGH GLOSS PDS International Perfection Product Data Sheet English Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – 2 COMPONENT – SUPER HIGH GLOSS”

Your email address will not be published. Required fields are marked *

Need Help?