COATING SYSTEM – 1 COMPONENT – SUPER HIGH GLOSS

CHOOSE PACKAGING, COLOR AND QUANTITY FOR EACH PRODUCT.

Alkyd

Choose Packaging
Pick Color
  • Grey
  • Red
  • White
-
+
Choose Packaging
Pick Color
  • YKA 027 Cream
  • YKA 139 Woodward Green
  • YKA 151 Platinum
  • YKA 184 Mediterranean White
  • YKA 187 Ivory
  • YKA 241 Norfolk Green
  • YKA 265 Rescue Orange
  • YKA 504 Fire Red
  • YKA 905 White
  • YKA 923 Squall Blue
  • YKB 830 Sapphire Blue
  • YKB 993 Oxford Blue
  • YKB000 Snow White
  • YKE 938 Danube Blue
  • YKF 684 Atlantic Grey
  • YKF 991 Mauritius Blue
  • YKJ 292 Bounty
  • YKS 101 Yellow
  • YKS 299 Rochelle Red
  • YKS 936 Lauderdale Blue
  • YKT 541 Donegal Green
  • YKU 898 Bondi Blue
  • YKY 999 Jet Black
  • YKZ 501 Rustic Red
-
+
Choose Packaging
-
+

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminants such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

Layer Product Name  Generic Type Mix Ratio Min. Temp. Dry time @ 25°C m2/L brush m2/L spray Thinner
1st coat Interprime 198 1  comp. alkyd primer n/a -5°C 1 hr 4,92 3,28 GTA007
2nd coat Toplac 1 comp. alkyd topcoat n/a 5°C 8 hrs 12 8 n/r

Find the right application tools in the toolbox for solvent based coatings

Tips

  1. Do not apply or expose the paint below dew point, above 80% relative humidity, rain or temperatures below 10°C during application or drying.
  2. Apply a stripe coat by brush on sharp edges, cavities such as pitting corrosion, in corners and difficult areas to reach by spray

 

Always read the product technical data sheet and safety data sheet before using the coatings, to be found in the Download section.

 

Additional information

Weight 25 kg
End Use

, , , , ,

Brand

Industry

Gloss Level

Components

Compatible with

1 component, 2 component

Substrate

, , ,

Budget - Low (*) to High (*****)

****

Productivity - Low (*) to High (*****)

**

Quality - Low (*) to High (*****)

***

Surf Prep M&R

, , , , ,

Surf Prep New Steel

,

UV resistance - Low (*) to High (*****)

*****

Systems

, , ,

Coating, Lining or PFP

Coating

Market Segment

Solvent

Layer

,

Product type

,

Detailed information about COATING SYSTEM – 1 COMPONENT – SUPER HIGH GLOSS

Intended usesFor painting areas above the waterline requiring a nice easthetic finish
Max. DFT280 µm
Min. DFT90 µm
Typical DFT180 micr. DFT
ChemistryAlkyd

Downloads

Product name Document name Document type Language Download
COATING SYSTEM – 1 COMPONENT – SUPER HIGH GLOSS PDS Interrprime 198 Product Data Sheet English Download
COATING SYSTEM – 1 COMPONENT – SUPER HIGH GLOSS PDS International Toplac Product Data Sheet English Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – 1 COMPONENT – SUPER HIGH GLOSS”

Your email address will not be published. Required fields are marked *

Need Help?