How to Paint a Wooden Door

Video link

Preparation

• Thoroughly degrease the surface and dry with a clean cloth.
• Lightly sand the entire surface with P150 sandpaper and fine sand with P240 sandpaper.
• Thoroughly remove dust with a soft brush.
• Tape the edges accurately with masking tape.

Primer

• Apply Levis Primer to corners and edges with a brush.
• Paint the large areas with a short-haired lacquer roller. Do this always crosswise; put some vertical stripes and roll them out horizontally.
• Roll out one last time gently from bottom to top for an even result.
• When the primer is dry, sand lightly with P240 grit and dust off.

First finishing layer

• Stir the paint well beforehand for a homogeneous color result.
• Apply in the same way as the primer.
• When the first coat is dry, sand lightly with P240 grain and dust off.

Second and final finishing coat

• Apply like the first finishing coat.
• Gently roll out one last time from bottom to top for an even result.
• Remove the masking tape while the paint is still wet.

Supplies

Finishing

• Ammonia water (9 parts water and 1 part ammonia)
• Non-fluffy cloth
• Sponge
• Sandpaper P150
• Sandpaper P240
• Dust brush
• Masking tape
• Sandpaper P240
• Dusting brush
• Brush with synthetic bristles
• Short-haired paint roller