Polyfilla Pro F210 1L

Description

Ready-to-use lightweight filler based on polymer dispersion

Preparation

The substrate must be clean, dry, dust-free, grease-free and free of all loose parts.
Highly absorbent and/or powdering surfaces must be fixed beforehand. Metal
Metal parts in the substrate such as nails and screws must be treated beforehand with an anti-corrosion
an anticorrosive primer (such as Polyfilla Pro S200).

Drying time
Sandable after minimum 2 hours for a 5 mm deep repair. Drying time depends on
the substrate, the depth of the repair, temperature and air humidity.

Storage
Cool, dry and frost-free.

Notes
– Suitable for outdoor use if covered with 2 coats of paint