Carboguard 101 – HS Epoxy – Buried pipes & Tanks (plural spray)

Carboguard 101 (ex Apsacoat 101),is a very high solids self-priming coating. Excellent corrosion resistance product to marine/chemical environments. Used for the corrosion protection of buried tanks and pipes.

Epoxy

From  573,98 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (20L, 380l.)Min. consumption brush/roller: m2/lt0m2
1 (20L, 380l.)Min. consumption spray typical DFT: 0,5 m2/lt0m2

Description

Carboguard 101 (ex Apsacoat 101),is a very high solids self-priming coating. Excellent corrosion resistance product to marine/chemical environments. Used for the corrosion protection of buried tanks and pipes.

Additional information

WeightN/A
Product type

Coating, Lining or PFP

Coating

Market Segment

Hydro, O&G Midstream, Petrochemical, Power – Conventional, Water & Wastewater

Brand

Gloss Level

Semi-gloss

Components

2

Layer

Primer, Primer/finish, Steel Primer

Color

Substrate

Carbon Steel

Solvent

Solvent Based

Industry

Industrial Coatings

ISO 12944 Durability

Very High

ISO 12944 Environment

Im4

Productivity - Low (*) to High (*****)

***

Quality - Low (*) to High (*****)

*****

Surf Prep New Steel

Sa2.5

Packaging

20L, 380

End use

Buried pipe external, Buried tanks exterior, Jackets offshore platforms, Jetty piles, Offshore Wind Foundations, Seawater immersion, Seawater intake

Detailed information about Carboguard 101 – HS Epoxy – Buried pipes & Tanks (plural spray)

Intended usesRecommended for long term high resistance, such as: • External surfaces for sea lines and pipelines, buried or immersed in sea and fresh water. • External coating for elbows, valves, joints, fittings etc., buried or immersed in sea and fresh water. • Piles and structures coating of steel and concrete piers. • Jackets coating of off-shore platforms. • Coating of immersed areas, topsides, splash zone of any steel or concrete surface to be immersed in sea or fresh water. • External/Internal coat for sea water inlets.
Volume solids98%
VOC50 g/l gr/lt
Max. DFT3000 µm
Min. DFT1000 µm
Theor m2/lt at average DFT0,96 m2/lt
Typical DFT1000
Min. consumption spray m2/lt typical DFT0,5 m2/lt
Drying time (25C)Drying Time : 8 hours - Hardness Shore D: 65 Drying Time: 20 hours - Hardness Shore D: 75 Drying Time: 30 hours - Hardness Shore D: 85 maximum hrs
ChemistryEpoxy

Downloads

Product nameDocument nameDocument typeLanguageDownload
Carboguard 101 – HS Epoxy – Buried pipes & Tanks (plural spray)PDS Carboguard 101Product Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “Carboguard 101 – HS Epoxy – Buried pipes & Tanks (plural spray)”

Your email address will not be published.