Primer/Finish – Carboquick 200 – Fast A/C Polyaspartic – Colour

Fast curing single coat in colour for corrosive environments

Aliphatic Polyaspartic

 622,42 (incl. tax)


This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 micron dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc, Carbomastic, or Carboguard primers.

Additional information

Weight N/A

Product type

Coating, Lining or PFP


Market Segment




Compatible with

2 component


Solvent Based


Industrial Coatings





Carbon Steel

ISO 12944 Durability

High, Medium

ISO 12944 Environment

C2, C3, C4

Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


UV resistance - Low (*) to High (*****)


Surf Prep New Steel

Sa2, Sa2.5

Detailed information about Primer/Finish – Carboquick 200 – Fast A/C Polyaspartic – Colour

Intended usesSingle coat primer/finish in a wide variety of corrosive environments
Volume solids70%
Max. DFT250 µm
Min. DFT100 µm
Theor m2/lt at average DFT7 m2/lt
Typical DFT100
Min. consumption brush/roller m2/lt6.3 m2/lt
Min. consumption spray m2/lt typical DFT4.2 m2/lt
Drying time (25C)1.5 hrs
Drying time (10C)7 hrs
Drying time min. temp17 hrs
Min. application temp.35°F (2°C)
Max. operating temp.Continuous: 250°F (121°C) Non-Continuous: 300°F (149°C)
ChemistryAliphatic Polyaspartic


Product name Document name Document type Language Download
Primer/Finish – Carboquick 200 – Fast A/C Polyaspartic – Colour PDS Carboquick 200 Product Data Sheet English Download


There are no reviews yet.

Be the first to review “Primer/Finish – Carboquick 200 – Fast A/C Polyaspartic – Colour”

Your email address will not be published.