COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – Black

CHOOSE COLOUR, PACK SIZE AND QUANTITY HERE. READ THE APPLICATION GUIDELINES BELOW.

Moisture Cure Urethane

From  32,61 (incl. tax)

Size
Color
  • Gray
  • Red Gray
-
+
From  168,58 (incl. tax)
Color
  • Black
  • Gray
  • Red Brown
Size
-
+
From  89,31 (incl. tax)
Size
-
+
From  120,90 (incl. tax)
Size
-
+
From  32,61 (incl. tax)
  • Delivered within 2 days.
  • Free shipping on orders above € 150,-.

Description

  1. Depending on the amount of bare (rusted) steel, apply a first and 2nd coat of Stelpant PU-Zinc rich (spot) primer on bare steel and/or corrosion areas. Two layers will improve performance.
  2. Apply a third full coat of Stelpant-PU-Combination 300 on the flanks and underwater hull. Repeat with a 4th coat of Stelpant-PU-Combination 300 on the immersed areas.
  3. OR on the flanks or topside, apply a 4th coat of Stelpant-PU MICA UV. This is a MIO filled, UV resistant and colour stable topcoat, with high impact and abrasion resistance. Black will remain black over extended periods of time.

The unique moisture cured urethane surface tolerant zinc rich primer Stelpant-PU Zinc demonstrates exceptional corrosion resistance, even when applied directly to tight rust. Stelpant-PU Zinc is known for its outstanding mechanical strength, abrasion- and impact resistance.

This moisture cured urethane system is compatible with most coal tar or bitcherman based old coatings, and can be overcoated with anti-fouling from International Paint. Do a small trial area first.

Additional information

Brand

Budget - Low (*) to High (*****)

****

Composition

, , ,

Compatible with

1 component, 2 component

Components

Single pack

End use

Flanks & Underwater Hull, Hull Immersion, Topside

Gloss Level

Semi-gloss

ISO 12944 Durability

Very High

ISO 12944 Environment

C5, Cx

Layer

Intermediate, Primer/finish, UV Resistant Coloured topcoat

Productivity - Low (*) to High (*****)

****

Quality - Low (*) to High (*****)

*****

Substrate

Carbon Steel, Painted (1 component), Painted (2 component)

Surf Prep M&R

FR Sa2.5, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Systems

Hull – Above waterline, Hull – Below waterline

Surf Prep New Steel

Sa2, Sa2.5

UV resistance - Low (*) to High (*****)

*****

Detailed information about COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – Black

Intended usesTopside where coal tar or bitcherman type coatings were used before
Min. DFT225 µm
Typical DFT350 micr. DFT
ChemistryMoisture Cure Urethane

Downloads

Product nameDocument nameDocument typeLanguageDownload
COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – BlackPDS Stelpant PU-ZincProduct Data SheetEnglish Download
COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – BlackPDS Stelpant PU-Combination 300Product Data SheetEnglish Download
COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – BlackPDS Stelpant Mica-UVProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – Ship Hull Topside System – Coal Tar Encapsulation – Black”

Your email address will not be published.