High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy

A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.

Epoxy Phenolic-Novolac Blend

From  135,34 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (5l, 20l.)Min. consumption brush/roller: 7,5 m2/lt35m2
1 (5l, 20l.)Min. consumption spray typical DFT: 5 m2/lt25m2

Description

A high performance immersion-grade coating system which has excellent resistance to wet/
dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates
under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance
properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This
coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion
under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.

Additional information

WeightN/A
Product type

Coating, Lining or PFP

Coating, High Temperature Coatings

Market Segment

O&G Midstream, Oil & Gas Upstream, Petrochemical, Power – Thermal Fuel, Pulp & Paper

Brand

Gloss Level

Semi-gloss

Components

2

Compatible with

2 component

Layer

Primer, Primer/finish, Steel Primer

Color

,

Substrate

Carbon Steel, Primed Steel

Solvent

Solvent Based

Max operating temp

205ºC

Industry

Industrial Coatings

Productivity - Low (*) to High (*****)

***

Quality - Low (*) to High (*****)

****

UV resistance - Low (*) to High (*****)

**

Surf Prep New Steel

Sa2.5

End use

Insulated & Uninsulated Piping & Equipment, Insulated internal surfaces, Insulated storage tank, Valves

Packaging

20L, 5L

Detailed information about High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy

Intended usesInsulated valves, pipes and equipment made our to carbon or stainless steel, operating at high temperature
Volume solids84%
VOCAs Supplied : 1.00 lbs/gal (119 g/l) gr/lt
Max. DFT200 µm
Min. DFT100 µm
Theor m2/lt at average DFT8,3 m2/lt
Typical DFT100
Min. consumption brush/roller m2/lt7,5 m2/lt
Min. consumption spray m2/lt typical DFT5 m2/lt
Drying time (25C)12 hrs
Drying time (10C)36 hrs
Drying time min. temp36
Min. application temp.50°F (10°C)
Max. operating temp.205C
ChemistryEpoxy Phenolic-Novolac Blend

Downloads

Product nameDocument nameDocument typeLanguageDownload
High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic EpoxyPDS Thermaline 450 EPProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy”

Your email address will not be published.