Description
Water-dilutable, high-quality, matt, elastic facade paint based on a styrene acrylate dispersion.
Application
Façades: elastic finishing layer on cemented façades, bricks, concrete….
To bridge fine hair and shrinkage cracks.
Also as a finishing layer in the Herbol-HERBOFLEX system.
Properties
Matte view. Light and colourfast.
High-coverage elastic finishing layer, water vapor permeable and carbonation-inhibiting (μdCO2>50 m)
Reliable resistance to weather and environmental influences, … (driving rain, temperatures, UV rays, aggressive industrial gases)
Technical data
Density Approx. 1.40 kg/l
Binder Styrene Acrylate Dispersion
Pigmentation Rutile Titanium dioxide and special fillers.
Building physical values DINEN1062
• gloss (reflection meter value) G3 matt < 10
• layer thickness E3
• grain size S1 fine < 100 m
• water vapor permeability V2 average sd = 0.79 m μ-H2O = 4000-7000
• water permeability W3 low ώ = 0.04 kg/(m² * h 0.5)
Color Can be colored via the Herbol-Color-Service System
Available in white + base DU1 + base DU2 + base DU3
Packs 5 and 12.5 l
Storage In original sealed packaging in a cool, dry and frost-free place
EU VOC limit value EU limit value for this product (cat A/c): 75 g/L (2007) / 40 g/L (2010). This product contains
max. 35 g/L VOC
Solids content In volume approx. 41 %; by weight approx. 59 %
Processing data
Processing Brush, roller and spray (also airless)
Processing conditions Apply at least 5 °C for substrate and air temperature during and after the
processing.
Attention: Avoid direct sunlight, rain, mist, dew and strong wind.
Consumption data Smooth surfaces : approx. 200 ml/m² per layer
Rough surfaces: approx. 400 ml/m² per layer
Drying times (at 23°C and 50% R.H.) Recoatable and rainproof: after approx. 6 to 12 hours.
Dilution / cleaning of the tools Water
Spray data airless Pressure: 140 to 180 bar, depending on the flow rate
– Opening: from 0.019 inch
Gun Filter 60 – Angle 40-80°
Safety Information
Flash point Not applicable
Transport code Not applicable
R and S phrases R 52/53 Harmful to aquatic organisms; can be in the aquatic
cause long-term adverse effects on the environment
S 2 Keep out of the reach of children.
S 46 If swallowed, seek medical advice immediately and remove container or show label.
General Ensure adequate ventilation during and after application.
In case of insufficient ventilation, wear suitable respiratory equipment.
When working on paint layers such as sanding, welding, burning, etc., hazardous
dust particles and/or vapors are released. Work in a well-ventilated area. Usage appropriate self-protection equipment when necessary.
System structure
All paintwork and necessary pre-treatments must be applied to the object adapted: i.e. they must be adapted to the condition, the performance requirements and the conditions to which they are exposed.
Building dynamic cracks are subject to extreme movements, so a crack bridging system is not always possible. Local repairs can remain visible under certain conditions. Connections of windows, doors and window sills must be fitted with an adapted elastic sealant. During the
Protect processing from rain, extreme humidity and frost.
Color deviations can be caused by different substrate structures, gloss levels, application and light influences. The suction power of the substrate, the
drying method and weather influences during processing can lead to minor deviations lead. This is not a cause for complaint.
Facades
Ensure that work can be done on a firm and clean surface.
Note: Do not use on calcareous substrates (mortar groups PI) and horizontal water-loaded surfaces.
Ensure that work can be done on a firm and clean surface.
Untreated lime cement and cement mortar groups (PII and PIII):
Allow new cementations to dry out for 2 to 4 weeks.
Fixation: Herbol-TIEFGRUND SB; or Herbol-MULTIGRUD SB
Intermediate coat: an intermediate coat with Herbol-HERBOFLEX FINISH MATT, max. 5% diluted with water
Finish: A finish with Herbol-HERBOFLEX FINISH MATT.
Untreated masonry, cement fiber boards, concrete,…:
Fixation: Herbol-TIEFGRUND SB or with Herbol-MULTIGRUD SB
Intermediate coat: an intermediate coat with Herbol-HERBOFLEX FINISH MATT, max. 5% diluted with water
Finish: A finish with Herbol-HERBOFLEX FINISH MATT.
Consult our technical service for special facade problems (cracks, …)
Reviews
There are no reviews yet.