VENTI 3PLUS SATIN ZQ
Silk gloss one-pot system
Synthetic “one-pot” system for all woods based on alkyd resins for out of use. Silky gloss.
Outside on all wood substrates (primer, intermediate and finishing coat).
As an intermediate and finishing coat on pre-treated metals and hard paintable surfaces plastics (PVC).
- Moisture regulating system: allows moisture diffusion to take place without any problems.
- Weather resistant paint system, long lasting protection.
- Supple, elastic layer.
- Thixotropic : high layer thickness and good edge coverage.
- Easy to work with and quick drying.
- Aromatic free.
- Note: yellowing
Any alkyd-based paint will, when used indoors, in white and pastel shades, influence of heat and the lack of direct daylight yellowing.
Density Approx 1.24 kg/l
Binder: Alkyd resin
Pigmentation: Rutile Titanium dioxide and special fillers.
Shine: Silky gloss. The final gloss level is reached after 2 to 3 weeks.
Colour Can be tinted via the Herbol “LACK IN LACK” Color Service System. Available in white + base LA1 + base LA3
Packaging; base in 1 and 2.5 L (white in 0.75 and 2.5 L)
Storage: In original closed packaging in a cool, dry and frost-free place
VOC EU limit value: EU limit value for this product (cat A/d) : 400 g/L (2007) / 300 g/L (2010). This product contains max. 299 g/L VOC.
Solids content: In volume about 64 %; by weight approx. 77 %
Brush, roll. Do not spray.
Apply at least 5 °C for substrate and air temperature during and after the processing.
Attention: direct sun rays, rain, mist, dew and strong wind avoid.
Approx. 100 ml/m 2 per layer
Drying times (at 23°C and 50% RH)
Dust dry: after approx. 3 hours.
Tack-free: after approx. 6 hours
Can be painted over after approx. 8 to 12 hours.
Loadable: after approx. 1 to 2 days
Cleaning the tools Herbol-KUNSTHARZ-VERDÜNNUNG V40 or white spirit
flash point: > 23°C DIN 53213
Transport code: UN1263 PAINT VSE (ADR 22.214.171.124.5)
R and S sentences
R 10 Flammable
R52/53 Harmful to aquatic organisms; can inlong-term adverse effects on the aquatic environment cause.
R 66 Repeated exposure may cause skin dryness or cracking cause.
S 2 Keep out of the reach of children.
S 16 Keep away from sources of ignition – No smoking.
S 23 Do not breathe gas/fume/vapour/mist.
S 24/25 Avoid contact with eyes and skin.
S 46 If swallowed, seek medical advice immediately and show packaging or label.
S 51 Use only in well-ventilated areas.
Ensure adequate ventilation during and after application.
In case of insufficient ventilation, wear suitable respiratory equipment.
When working on paint layers such as sanding, welding, burning off, etc., release hazardous dust particles and/or vapours. Work in a well-ventilated room. Use appropriate self-protection equipment when necessary.
All paintwork and necessary pre-treatments must be
object are adapted: i.e. they must be attuned to the condition, the
performance requirements and the conditions to which they are exposed.
VENTI 3PLUS SATIN ZQ
version no. and validity dates
The information contained in this publication has been updated in accordance with the current status of the research technique.
However, due to the versatility of application and processing methods, no liability is accepted.
Our general delivery and payment conditions apply to advice and delivery.
AKZO NOBEL PAINTS Belgium NV/SA
PROF – HERBOL
G. Levisstraat 2, B-1800 Vilvoorde
Technical Center Herbol
E : HERBOLTECHNICAL@AKZONOBEL.COM
Iron and Steel
Making stainless to a clear metallic luster is visible. degrease. Always 2 layers of soil with Herbol-ALLGRUND ZQ or with Herbol-
Paintable Hard plastics
Substrate with a mixture of 10 l water, 1/2l 25% ammonia solution, 2 bottle caps washing up liquid with a Scotch-Brite sponge wet to sand. A fine foam layer is created, leave to act for about 10 minutes. Connecting sand again. Then rinse thoroughly with clear water. Let dry well.
Always 2 layers of primer with Herbol-ALLGRUND
Apply ZQ or with Herbol-HYDROPRIMER.
Thoroughly clean and degrease surfaces with nitro thinner, sanding with nylon or perlon fleece, until complete removal of
the corrosion spots. Always 2 layers of primer with Herbol-HYDROPRIMER or with Herbol-
After pre-treatment, a primer with Herbol- VENTI 3PLUS SATIN ZQ.
Paint system ***
Finish with 2 x Herbol-VENTI 3PLUS SATIN ZQ
There are no reviews yet.