Description
Descrption of Sikkens Alphacryl Morpha
Washable matt insulating wall paint for indoor use based on a water-dilutable acrylic dispersion.Acrylic FLOW TechnologyA binder that gives a smooth finish. In combination with a long open time, which allows you to work longer.
Key Features
– ACRYLIC FLOW TECHNOLOGY
– Washable (wet scrub resistance class 1), does not shine.
– Extra decorative matte paint.
– Isolates stains of eg nicotine, ink, ….
– Blocks plasticizers.
– Can act as a one-pot system.
– Low tension.
– Non-porous paint.
– Easy to process.
– Fast drying.
– High flexibility.
– Does not splash and can be applied without starting.
Substrates
Treating plaster, concrete, primed surfaces, fiberglass cladding.
Ideal on walls with obliquely incident light.
Application:
With brush, roller. ready to use.
Tecchnical Data
This data relates to on the color: white
Density: 1.38 ± 0.05 kg/dm 3
Binder: Pure acrylic
Gloss level Pot mat, < 2 GU / 85°
Scrub resistance class: Class 1 according to DIN EN 13300
Opacity: Good, Class 2 according to DIN EN 13300
Solids Content: By volume : approx. 44 %
By weight : approx. 59 %
VOC EU limit valueEU limit value for this product (catA/a) : 30 g/l (2010). This product contains maximum 25 g/l VOC.
Assortment/available in the to colour White and a large number of colors from the Sikkens color range “5051 ColorConcept”, achievable with a color mixing machine starting from a base W05, M15 or N00.Heat resistance: 60°C under continuous load and up to 80°C at peak times
Recommended layer thickness per coatDry 40 to 49 µm = wet 90 to 110 µm
Yellowing Resistance: Non-yellowing
Structure: Smooth/fine 2B2B
Processing Conditions
Substrate temperature: min. 8°C
Ambient temperature: 10-30°C
Relative humidity: max. 80%
Processing Methods/tools: With brush, roller
Product is ready to use for brush and roller.
Drying: Dust dry: 1 hour
Can be painted over: After 6 hours with dispersion paints.
After 24 hours if water-soluble stains should be isolated.
Dilution/Cleaning: With water.
Dilution %: Ready to use for brush and roller.
Can be painted over with all common wall paints/dispersion paints.
Efficiency: 9 – 11 m²/l/layer, depending on the application method, – material, from the roughness, structure and porosity of the substrate.
Accurate yield to be determined on a test area.
Comments: Areas with high humidity
The base W05 can also be used in rooms with high humidity.
For colors achievable from a base M15 and N00 we would recommend Alphacryl Perlino.
System Information
Untreated surfaces
New, unpainted surfaces
Gypsum-bound substrates must be cohesive, load-bearing and to be hard enough.
Remove loose plaster residues and de-grain impurities.
Thoroughly dedust.
Remove the surfaces of dirt, grease, dust, etc
Fix completely with a layer of diluted (10% water) ALPHACRYL PRIMER
or ALPHACRYLIC PURE PRIMER SF . On less porous surfaces, increase the dilution percentage to max. 20%.
Let it dry for 6 hours.
Prepaint with SIKKENS ALPHACRYL MORPHA .
Let it dry for 6 hours.
Finish with 1 coat of SIKKENS ALPHACRYL MORPHA .
Treated surfaces in good condition/maintenance
Painted surfaces
Wash old intact dispersion, oil and alkyd resin wall paints completely with ammonia water and a good matt sanding.
Update any flaws.
Completely pre-treat with SIKKENS ALPHACRYL PRIMER or SIKKENS ALPHACRYL PURE PRIMER SF .
6 h to dry.
Prepaint with SIKKENS ALPHACRYL MORPHA .
Let it dry for 6 hours.
Finish with 1 coat of SIKKENS ALPHACRYL MORPHA .
Remark:
– For isolating water-soluble stains, 2 undiluted layers apply at least 24 hours apart.
– In certain cases (depending on the colour) a finish with 1 low SIKKENS ALPHACRYL MORPHA will suffice.
Safety & Legislation
Safety data sheet
For more information and the most current safety data, see the product safety sheet.
Product information:
– Water vapor permeable.
– Not saponifiable
