Stain Covering primer – Levis – White – 2.5L, 5L

Opaque water-based insulating primer with good penetrating power. For interior walls and ceilings. Completely isolates stains from eg moisture rings, nicotine, soot. Fixes powdery surfaces.

Insulating Primer

From  72,60 (incl. tax)


Levis Stain Covering Primer

White opaque, water-based primer that seals stains.


Applicable to walls and ceilings in plaster, plasterboard and fiberglass cladding that be completely dry. For indoor use.


Insulates stains from, for example, nicotine, soot and dried moisture rings.

Also fixes powdery surfaces. Evens out the absorption of the substrate so that no gloss differences are in the final coat. Improves adhesion and optimizes the yield of the finishing coats. Easy to apply. Water-based and low-odour. Quick drying and

Can be painted over after 6 to 8 hours. However, for an optimal stain insulating effect, a drying time of 24 hours is allowed recommended.




2.5l and 5l

Stir well before use. Processing with brush and roller. ready to use.

Do not apply at temperatures below 10°C or too humid weather.

Cleaning tools with water.


12 m²/l per layer

Product description


Drying time

Dust dry: after 3 to 4 hours. Can be painted over: after 6 to 8 hours.

For an optimal stain insulating effect, 24 hours of drying time is required.

Plaster, plasterboard and fiberglass cladding


Thoroughly dust off the surface. If applicable: fill cracks, cracks and holes with a suitable Polyfilla product. Lightly sand and dust the surface.

If a lot has been updated or if the substrate has to be insulated due to the presence from stains: Use Levis Stain Covering Primer instead of another Levis primer range such as Levis Ambiance Murprimer, Levis Primer Mur & Ceiling,…


Apply two coats of a wall or ceiling paint of your choice from the Levis range.


Avoid contact with eyes and skin. Keep out of reach of children.

Do not throw waste into the sink.

VOC content

This product contains a maximum of 20 g/l VOC. EU limit value for this product (category A/g): 30 g/l (2010).


Reseal packaging properly. Store frost-free.

Security and Storage

Substrates and instructions for use

This technical record, dated 1-12-2017, cancels and replaces all previous editions. This technical data is based on own knowledge and experiments and are provided to you as a guideline. However, this does not imply any formal liability for useof our products. Always ask our services whether there is no new index card of recent date.

For further advice: tel. +32 (0)800.24.111

In case of intoxication, immediately contact the Poison Control Center on number: +32 (0)70.245.245

Akzo Nobel Paints Belgium NV/SA, Everest Office Park, Leuvensesteenweg 248 B, B-1800 Vilvoorde +32 (0)

Additional information

Weight N/A

2,5L, 5L


Detailed information about Stain Covering primer – Levis – White – 2.5L, 5L

Theor m2/lt at average DFT12 m2/lt
Min. consumption brush/roller m2/lt12 m2/lt
Drying time (25C)3-4 hrs hrs
ChemistryInsulating Primer


Product name Document name Document type Language Download
Stain Covering primer – Levis – White – 2.5L, 5L PDS Levis Vlekbedekkende Primer Download
Stain Covering primer – Levis – White – 2.5L, 5L MSDS Levis Vlekbedekkende Primer Download


There are no reviews yet.

Be the first to review “Stain Covering primer – Levis – White – 2.5L, 5L”

Your email address will not be published.