Primer/Finish – Carboguard 890 – 2C Epoxy Mastic

Excellent corrosion resistant, 2 component epoxy primer/finish coating, available in colour. Wide compatibility. Universal in use in Industrial and Marine industry. Excellent for interior concrete floors.

2C Epoxy Mastic

From  103,46 (incl. tax)


Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.

Additional information

Weight N/A

20L, 5L

Coating, Lining or PFP





Compatible with

2 component


Solvent Based


Industrial Coatings

ISO 12944 Durability

High, Very High

ISO 12944 Environment

C2, C3, C4, C5, Cx, Im2

Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


UV resistance - Low (*) to High (*****)


Surf Prep M&R

FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Surf Prep New Steel

Sa2, Sa2.5, Sa3


Carbon Steel, Painted (2 component)

Market Segment

Bridge & Highway, Commercial & Architectural, Marine, Metals & Mining, O&G Midstream, Oil & Gas Upstream, Petrochemical, Pharmaceutical, Power – Conventional, Power – Thermal Fuel, Pulp & Paper

Product type

, ,

Surf Prep Concrete


End use

Concrete floors, Structural steel


Detailed information about Primer/Finish – Carboguard 890 – 2C Epoxy Mastic

Intended usesUniversal primer finish in corrosive marine or industrial environments, to protect steel from corrosion. Can be used over existing coatings.
Volume solids75%
VOCAs Supplied : 1.81 lbs/gal (217 g/l) gr/lt
Max. DFT200 µm
Min. DFT100 µm
Theor m2/lt at average DFT7,5 m2/lt
Typical DFT100
Min. consumption brush/roller m2/lt6,75 m2/lt
Min. consumption spray m2/lt typical DFT4,5 m2/lt
Drying time (25C)12 hrs
Drying time (10C)4 hrs
Drying time min. temp12
Min. application temp.10C
Chemistry2C Epoxy Mastic


Product name Document name Document type Language Download
Primer/Finish – Carboguard 890 – 2C Epoxy Mastic PDS Carboguard 890 Product Data Sheet English Download


There are no reviews yet.

Be the first to review “Primer/Finish – Carboguard 890 – 2C Epoxy Mastic”

Your email address will not be published.