Primer/Finish – Carboguard 893 SG – 2C Zinc Phosphate Epoxy

Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and […]

Epoxy polyamide with corrosion inhibitor (zinc phosphate)

From  235,10 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (10l.)Min. consumption brush/roller: 7,4 m2/lt70m2
1 (10l.)Min. consumption spray typical DFT: 5 m2/lt50m2

Description

Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming
finish over steel and zinc primers. Carboline glass flake additive may be added to improve
performance including internal strength, hardness, impact, and abrasion resistance. May be
topcoated with itself, or a broad variety of high performance finish coats. Product also has surface
tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).

Additional information

Color

, ,

Packaging

10L

Product type

,

Coating, Lining or PFP

Coating

Gloss Level

Egg-shell gloss

Components

2

Compatible with

2 component

Substrate

Carbon Steel, Painted (2 component), Primed Steel

Solvent

Solvent Based

Industry

Industrial Coatings

ISO 12944 Environment

C2, C3, C4

Productivity - Low (*) to High (*****)

***

Quality - Low (*) to High (*****)

****

UV resistance - Low (*) to High (*****)

***

Surf Prep New Steel

Sa2.5

ISO 12944 Durability

High, Medium

Market Segment

Bridge & Highway, Commercial & Architectural, Marine, O&G Midstream, OEM, Oil & Gas Upstream, Petrochemical, Power – Thermal Fuel, Pulp & Paper, Water & Wastewater

Brand

Layer

Primer, Steel Primer

Detailed information about Primer/Finish – Carboguard 893 SG – 2C Zinc Phosphate Epoxy

Intended usesUsed either as a primer, intermediate coat, or self-priming finish over steel and zinc primers into typically C3 and C4 environments as per ISO 12944
Volume solids63%
VOCAs Supplied : 2.70 lbs./gal (324 g/l) gr/lt
Max. DFT150 µm
Min. DFT75 µm
Theor m2/lt at average DFT8,3 m2/lt
Typical DFT75
Min. consumption brush/roller m2/lt7,4 m2/lt
Min. consumption spray m2/lt typical DFT5 m2/lt
Drying time (25C)7 hrs
Drying time (10C)24 hrs
Drying time min. temp24
Min. application temp.50°F (10°C)
Max. operating temp.Continuous: 300°F (149°C)
ChemistryEpoxy polyamide with corrosion inhibitor (zinc phosphate)

Downloads

Product nameDocument nameDocument typeLanguageDownload
Primer/Finish – Carboguard 893 SG – 2C Zinc Phosphate EpoxyPDS Carboguard 893 SGProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “Primer/Finish – Carboguard 893 SG – 2C Zinc Phosphate Epoxy”

Your email address will not be published.