Interbond 2340UPC (20L) – 2 comp. – Primer/Finish – Heat Resistant

For use as an abarsion and impact resistant, anticorrosive primer/finish on insulated or non-insulated, carbon or stainless steel piping, valves and vessels operating between -196°C (-321°F) and 230°C (446°F).

 624,75 (incl. tax)


A high temperature pipe coating providing corrosion resistance in accordance with the ISO 12944-9 standard at ambient temperatures delivering productivity savings compared to inorganic zinc silicate and traditional epoxy phenolic based systems. Based on alkylated amine epoxy technology, Interbond 2340UPC is a next generation epoxy phenolic coating for high temperature applications.

Additional information

Weight 1,31 kg


, , ,


Product type


End use

Insulated & Uninsulated Piping & Equipment, Insulated internal surfaces, Valves

Coating, Lining or PFP

High Temperature Coatings



Compatible with

2 component


Primer, Primer/finish, Steel Primer


Carbon Steel, Painted (2 component), Primed Steel, Stainless steel


Solvent Based

Max operating temp



Marine Coatings

ISO 12944 Durability

High, Very High

ISO 12944 Environment

C5, Cx, Im2

Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


UV resistance - Low (*) to High (*****)


Surf Prep M&R

FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Surf Prep New Steel

Sa2, Sa2.5



Detailed information about Interbond 2340UPC (20L) – 2 comp. – Primer/Finish – Heat Resistant

Intended usesExternal protection for process pipes, valves and vessels operating between the temperatures of -196°C (-321°F) and 230°C (446°F). Suitable for use on both carbon and stainless steel in insulated or uninsulated conditions, as well as cryogenic service. Due to its superior high DFT tolerance, Interbond 2340UPC significantly reduces the risk of thick film cracking when compared to traditional epoxy phenolic coatings. Interbond 2340UPC eliminates the temperature and humidity requirements associated with inorganic zinc coatings resulting in better quality and productivity in all climates.
Volume solids60%
VOC390 gr/lt
Max. DFT200 µm
Min. DFT100 µm
Theor m2/lt at average DFT3,00 m2/lt
Typical DFT200
Min. consumption brush/roller m2/lt2,70 m2/lt
Min. consumption spray m2/lt typical DFT1,80 m2/lt
Drying time (25C)6 hrs
Drying time (10C)8 hrs
Drying time min. temp10
Min. application temp.-5ºC
Max. operating temp.?


Product name Document name Document type Language Download

You may also like…


There are no reviews yet.

Be the first to review “Interbond 2340UPC (20L) – 2 comp. – Primer/Finish – Heat Resistant”

Your email address will not be published.