Sale!

Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

For use as a one or two coat system above and below the waterline.

Moisture Tolerant Epoxy

 231,99 (incl. tax)

  • Aluminium
  • Black
Clear

  • Delivered within 2 days.
  • Free shipping on orders above € 150,-.

Description

Description

AkzoNobel International Paint’s Intergard 5000 is a light coloured, tar free, surface tolerant, universal primer with high volume solids (82%).

Intergard 5000 is alsotolerant of damp surfaces (see limitations section), and demonstrates excellent corrosion protection when applied directly to tight rust.

Intergard 5000 has very high impact and impact resistance as well as chemical resistance.

Application

International Paint’s Intergard 5000 can be applied to virtually all areas of the vessel, including the vessel’s hull below the waterline, also as a primer for the antifouling system, as well as above the waterline on the sides, walkways, den, in the holds, bilges or engine room.

Intergard 5000 provides excellent corrosion protection applied directly to solid rust, is compatible with a wide range of existing coatings, can be applied to damp substrates, and is resistant to rainwater within 30 minutes of application at 25 degrees Celsius.

This makes International Paint’s Intergard 5000 the excellent solution for on-board maintenance.

Additional information

Weight1.74 kg
Brand

Color

,

Product type

, , , , , , ,

Compatible with

1 component, 2 component

Layer

Primer, Primer/finish

End use

Accommodation, Bilges, Cargo Tank (alu), Cargo Tank (red), Deck, Engine room, Flanks & Underwater Hull, Hull Immersion, Living quarter, Topside, Void spaces, Water Ballast Tank, Wet void spaces

ISO 12944 Durability

Very High

ISO 12944 Environment

C5, Cx, Im2

Budget - Low (*) to High (*****)

***

Productivity - Low (*) to High (*****)

****

Quality - Low (*) to High (*****)

*****

UV resistance - Low (*) to High (*****)

***

Detailed information about Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

Intended usesAs a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted,hydroblasted or mechanically cleaned surfaces.For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Volume solids82%
VOC220 gr/lt
Max. DFT350 µm
Min. DFT125 µm
Theor m2/lt at average DFT5,47 m2/lt
Typical DFT150 micr. per coat
Min. consumption brush/roller m2/lt4,92 m2/lt
Min. consumption spray m2/lt typical DFT3,28 m2/lt
Drying time (25C)7 hrs
Drying time (10C)16 hrs
Min. application temp.5°C
ChemistryMoisture Tolerant Epoxy

Downloads

Product nameDocument nameDocument typeLanguageDownload
Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface TolerantPDS Intergard 5000Product Data SheetEnglish Download
Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant48843ManualEnglish Download

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant”

Your email address will not be published.