Sale!

Intergard 5000 Brush Grade (5L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

For use as an anticorrosive primer, applied directly do dry or damp substrates by brush or roller. Suitable for use as a universal, abrasion resistant primer/finish on in- and external areas above and below the waterline.

Moisture Tolerant Epoxy

 87,24 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (5l.)Min. consumption brush/roller: 4,92 m2/lt20m2
1 (5l.)Min. consumption spray typical DFT: 3,28 m2/lt15m2

Description

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces (see limitations section).

Intended uses:

As a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces.

For use at Newbuilding, Maintenance & Repair or On Board Maintenance.

 

Additional information

WeightN/A
Brand

Color

,

Composition

Product type

, , , , , , ,

Size

Compatible with

1 component, 2 component

Layer

Primer, Primer/finish

End use

Accommodation, Bilges, Cargo Tank (alu), Cargo Tank (red), Deck, Engine room, Flanks & Underwater Hull, Hull Immersion, Living quarter, Topside, Void spaces, Water Ballast Tank, Wet void spaces

Components

Multi pack

ISO 12944 Durability

Very High

ISO 12944 Environment

C5, Cx, Im2

Budget - Low (*) to High (*****)

***

Productivity - Low (*) to High (*****)

****

Quality - Low (*) to High (*****)

*****

UV resistance - Low (*) to High (*****)

***

Detailed information about Intergard 5000 Brush Grade (5L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

Intended usesAs a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces.For use at Newbuilding, Maintenance & Repair or On Board Maintenance. Accomodation, topside, ballast tank, cargo tank, deck, hatch cover, bulwark, hatch coming, cofferdam, bilges, engine room, hull, bottom plate, keel, keel to rail, flanks, bow, stern, propellor, cargo tank ship Shipping, marine, tanker, oil tanker, tanker ship, bunkerer, fishing boats, chemical tanker ship, bulk carrier, dry bulk carrier, car carrier, car carrier ship, roro vessel, general cargo ship, marine vessels, marine traffic, cruise ships, ships at sea, navy ships, military ships, inland waterway transport, coastal vessels, coastal ships, trade vessel, cargo ship, coaster shipping, tug boats, pleasure boats, yacht paint
Volume solids82%
VOC220 gr/lt
Max. DFT350 µm
Min. DFT125 µm
Theor m2/lt at average DFT5,47 m2/lt
Typical DFT150
Min. consumption brush/roller m2/lt4,92 m2/lt
Min. consumption spray m2/lt typical DFT3,28 m2/lt
Drying time (25C)7 hrs
Drying time (10C)16 hrs
Min. application temp.5°C
Max. operating temp.?
ChemistryMoisture Tolerant Epoxy

Downloads

Product nameDocument nameDocument typeLanguageDownload
Intergard 5000 Brush Grade (5L) – 2 comp. – Primer/Finish – Damp Surface TolerantIntergard 5000 Ballast Tan application manualManualEnglish Download

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Intergard 5000 Brush Grade (5L) – 2 comp. – Primer/Finish – Damp Surface Tolerant”

Your email address will not be published.