Description
A two component epoxy finish coat suitable for brush, roller and spray application.
For use as a cosmetic coloured finish coat on areas above the waterline requiring high abrasion resistance
SELECT COLOUR CATEGORY FIRST TO DETERMINE PRICE
A two component epoxy finish coat suitable for brush, roller and spray application.
Choose Packaging | |
---|---|
Brand | |
Composition | |
Product type | |
Pick Color | |
Coating, Lining or PFP | Coating |
Market Segment | |
Solvent | |
Pick your Color Group | Stdd. White, Cat. White / Beige, Cat. Yellow, Cat. Orange, Cat. Red, Cat. Violet, Cat. Blue, Cat. Green, Cat. Grey, Cat. Brown, Cat. Black |
Substrate | |
Layer |
Intended uses | As a tough, hard wearing finish for application over properly primed surfaces. Exhibits goodabrasion resistance, and affords good protection against spills and splashes of a range ofchemicals such as acids, alkalis, solvents, and salt solutions.Suitable for use in a wide range of environments |
---|---|
Volume solids | 51% |
VOC | 420 gr/lt |
Max. DFT | 100 µm |
Min. DFT | 50 µm |
Theor m2/lt at average DFT | 10,2 m2/lt |
Typical DFT | 50 |
Min. consumption brush/roller m2/lt | 9,18 m2/lt |
Min. consumption spray m2/lt typical DFT | 6,12 m2/lt |
Drying time (25C) | 16 hrs |
Drying time (10C) | 30 hrs |
Min. application temp. | 10°C |
Max. operating temp. | ? |
Product name | Document name | Document type | Language | Download |
---|---|---|---|---|
Intergard 740 (5L & 20L) – 2 comp. – Coloured Topcoat – Abrasion resistant | PDS Interthane 990 | Product Data Sheet | English | Download |
Reviews
There are no reviews yet.