For use as a universal “On Board Maintenance” primer on all internal and external areas above and below the waterline.
ALUMINIUM EPOXY Primer, A surface tolerant universal pure epoxy Primer for use as an anticorrosive touch up coating providing excellent corrosion protection and low temperature capability. Designed as a crew friendly onboard maintenance two pack universal Primer (<340 g/l) specifically engineered to equal mix ratio offering simplified mixing and reduced wastage
| Weight | N/A |
|---|---|
| Choose Packaging | |
| Brand | |
| Composition | |
| Product type | 2C Abrasion Resistant Epoxy, 2C Epoxy Pirmer/Finish, 2C Epoxy Primer, Deck Coatings |
| Compatible with | 1 component, 2 component |
| Layer | |
| Substrate | Carbon Steel, Painted (1 component), Painted (2 component), Primed Steel, Stainless steel |
| End Use | Accommodation, Bulwark, Cargo Tank (alu), Deck, Engine room, Flanks & Underwater Hull, Hatch Coaming, Hull Immersion, Topside, Void spaces, Water Ballast Tank, Wet void spaces |
| Components | |
| Budget - Low (*) to High (*****) | **** |
| Productivity - Low (*) to High (*****) | **** |
| Quality - Low (*) to High (*****) | ***** |
| UV resistance - Low (*) to High (*****) | |
| Coating, Lining or PFP | |
| Market Segment | |
| Surf Prep New Steel | |
| Solvent |
| Intended uses | As an On Board Maintenance universal anticorrosive Primer. Suitable for use with controlled cathodic protection. |
|---|---|
| Volume solids | 65% |
| VOC | 318 gr/lt |
| Theor m2/lt at average DFT | 8,67 m2/lt |
| Typical DFT | 110 |
| Min. consumption brush/roller m2/lt | 7,80 m2/lt |
| Min. consumption spray m2/lt typical DFT | 5,20 m2/lt |
| Drying time (25C) | 4 hrs |
| Drying time (10C) | 17 hrs |
| Drying time min. temp | 28 |
| Min. application temp. | -5°C |
| Max. operating temp. | ? |
| Product name | Document name | Document type | Language | Download |
|---|
Reviews
There are no reviews yet.