Sale!

Intertuf 362 (20L) Epoxy Primer Finish – Black – Ship Hull paint

A hard wearing, surface tolerant two pack epoxy primer that is winter workable, down to -5°C.

Epoxy

 249,02 (incl. tax)

  • Delivered within 2 days.
  • Free shipping on orders above € 150,-.
Qty Brush/roller or spray? Max. surface
1 (20 Ll.) Min. consumption brush/roller: 5.84 m2/lt 116.8m2
1 (20 Ll.) Min. consumption spray typical DFT: m2/lt 0m2

Description

AkzoNobel International Paint’ss Integarg 263 is a hard wearing, surface tolerant two pack epoxy primer that is winter workable, down to -5°C. Intertuf 362 is an versatile surface tolerant epoxy primer. With good resistance to water and some chemicals, Intergard 362 is suitable for most vessel areas. Low temperature cure.

Uses:

  • One of International Paint’s best seller in the inland shipping industry
  • As an epoxy anticorrosive coating for use from Keel to Rail on a ships hull, as a deck coating, painting hatch coaming or any other area on marine ships and vessels
  • Better alternative to coal tar epoxy or bitcherman coatings
  • Suitable for use with controlled cathodic protection.
  • For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
  • Good UV and colour stability for an epoxy primer coating
  • Eeasy to wash off
  • Nice smooth finish, availabe in black and other colours
  • Economical low cost solutions
  • Fast curing, applied in 1 or 2 coats for maintenance

Additional information

Product type

Color

Brand

Composition

Size

Detailed information about Intertuf 362 (20L) Epoxy Primer Finish – Black – Ship Hull paint

Intended usesAll areas above and below teh waterline on marine ships, inlands ships, boats and other marine vessels. As an epoxy anticorrosive coating for use from Keel to Rail on a ships hull, as a deck coating, painting hatch coaming or any other area on marine ships and vessels Suitable for use with controlled cathodic protection. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Volume20 L
Volume solids67%
VOC283 g/lt as supplied (EPA Method 24) gr/lt
Max. DFT250 µm
Min. DFT125 µm
Theor m2/lt at average DFT4,47 m2/lt
Typical DFT150
Min. consumption brush/roller m2/lt5.84 m2/lt
Drying time (25C)4 hrs hrs
Drying time (10C)8 hrs hrs
Drying time min. temp24 hrs at -5°C
Min. application temp.-5°C
Max. operating temp.120°C Dry
ChemistryEpoxy

Downloads

Product name Document name Document type Document language Document download
Intertuf 362 (20L) Epoxy Primer Finish – Black – Ship Hull paint PDS Intertuf 362 Epoxy Primer Finish Product Data Sheet English Download

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Intertuf 362 (20L) Epoxy Primer Finish – Black – Ship Hull paint”

Your email address will not be published. Required fields are marked *