SPECIFY THE DESIRED COLOUR CODE IN THE “NOTES” DURING CHECK OUT
Moisture Cure Urethane
From € 32,61 (incl. tax)
Stelpant-PU Mica UV has excellent adhesion when applied directly to clean galvanized or aluminum substrates. Stelpant-PU Mica UV is available in colours, and has excellent UV resistance, colour stability and abrasion/erosion resistance. As a single coat system that can be applied in all 4 seasons, this is a cost saving solution.
| Weight | 20 kg |
|---|---|
| Brand | |
| Budget - Low (*) to High (*****) | ** |
| Composition | |
| Coating, Lining or PFP | Coating |
| Compatible with | 1 component, 2 component |
| Components | Single pack |
| Gloss Level | Semi-gloss |
| Industry | Marine Coatings |
| ISO 12944 Durability | High |
| ISO 12944 Environment | C3, C4, C5 |
| Layer | Primer/finish |
| Market Segment | Protective Coatings |
| Max operating temp | 120ºC |
| Productivity - Low (*) to High (*****) | ***** |
| End use | Non-Ferro on deck |
| Quality - Low (*) to High (*****) | ***** |
| Surf Prep M&R | Solvent Clean SSPC-SP1 |
| Substrate | Hot Dip Galvanized, Stainless steel |
| Surf Prep New Steel | Sa1 |
| UV resistance - Low (*) to High (*****) | ***** |
| Intended uses | Single coat directly applied to non - ferro such as Galvanised or Aluminum |
|---|---|
| Volume solids | 57% |
| VOC | approx. 406 g/l gr/lt |
| Max. DFT | 100 µm |
| Min. DFT | 50 µm |
| Typical DFT | 60 micr. DFT |
| Min. consumption brush/roller m2/lt | 6.40 m2/lt |
| Min. consumption spray m2/lt typical DFT | 4.3 m2/lt |
| Drying time (25C) | 3 hrs |
| Min. application temp. | -5°C |
| Chemistry | Moisture Cure Urethane |
| Product name | Document name | Document type | Language | Download |
|---|---|---|---|---|
| COATING SYSTEM – Galvanized system – 1 coat – UV resistant | PDS Stelpant PU Mica UV | Product Data Sheet | English | Download |
Reviews
There are no reviews yet.