PFP – Thermo-Lag 3000 P – Intumescent hydrocarbon fire protection – Plural spray

Carboline Thermo-Lag 3000-SP is a two-component, petrochemical grade, 100% solids epoxy based intumescent designed to fireproof steelwork for up to a 4-hour fire rating, depending on the design. The recommended use for this product is […]

Polysulfide epoxy

 958,32 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (17L per componentl.)Min. consumption brush/roller: m2/lt0m2
1 (17L per componentl.)Min. consumption spray typical DFT: m2/lt0m2

Description

Carboline Thermo-Lag 3000-SP is a two-component, petrochemical grade, 100% solids epoxy based intumescent designed to fireproof steelwork for up to a 4-hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks, and electrical raceways.

Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).

 

Additional information

WeightN/A
Product type

Coating, Lining or PFP

PFP

Brand

Components

2

Color

Substrate

Carbon Steel, Primed Steel

Solvent

Solvent Free

Industry

Industrial Coatings

ISO 12944 Durability

Very High

ISO 12944 Environment

C4, C5

Productivity - Low (*) to High (*****)

*****

Quality - Low (*) to High (*****)

*****

Surf Prep New Steel

Sa2.5

Packaging

34L

End use

Structural steel

Market Segment

Fireproofing – Commercial, Fireproofing – Industrial

Detailed information about PFP – Thermo-Lag 3000 P – Intumescent hydrocarbon fire protection – Plural spray

Intended usesTo insulate steel form hydrocarbon fire
Volume solids100%
Typical DFTDepending on fire duration. Up to 4hrs
Drying time (25C)4 hrs
Drying time (10C)4 hrs
Drying time min. temp4
Min. application temp.50°F (10°C)
ChemistryPolysulfide epoxy

Downloads

Product nameDocument nameDocument typeLanguageDownload
PFP – Thermo-Lag 3000 P – Intumescent hydrocarbon fire protection – Plural sprayPDS Thermo-Lag 3000 PProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “PFP – Thermo-Lag 3000 P – Intumescent hydrocarbon fire protection – Plural spray”

Your email address will not be published.