PFP – Thermo-Lag 3000 SP – Intumescent hydrocarbon fire protection – Single leg airless

Carboline Thermo-Lag 3000-SP is a two-component, petrochemical grade, 95% solids epoxy based intumescent designed to fireproof steelwork for up to a 4-hour fire rating, depending on the design. The recommended use for this product is […]

Polysulfide epoxy

 1.103,10 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (17L per componentl.)Min. consumption brush/roller: m2/lt0m2
1 (17L per componentl.)Min. consumption spray typical DFT: m2/lt0m2

Description

Carboline Thermo-Lag 3000-SP is a two-component, petrochemical grade, 95% solids epoxy based intumescent designed to fireproof steelwork for up to a 4-hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks, and electrical raceways.

Thermo-Lag 3000-SP is designed for single leg airless spray application.

Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).

 

Additional information

WeightN/A
Product type

Coating, Lining or PFP

PFP

Brand

Components

2

Color

Substrate

Carbon Steel, Primed Steel

Solvent

Solvent Free

Industry

Industrial Coatings

ISO 12944 Durability

Very High

ISO 12944 Environment

C4, C5

Productivity - Low (*) to High (*****)

*****

Quality - Low (*) to High (*****)

*****

Surf Prep New Steel

Sa2.5

Packaging

34L

End use

Structural steel

Market Segment

Fireproofing – Commercial, Fireproofing – Industrial

Detailed information about PFP – Thermo-Lag 3000 SP – Intumescent hydrocarbon fire protection – Single leg airless

Intended usesTo insulate steel form hydrocarbon fire
Volume solids95%
VOCAs Supplied : 0.53 lb/gal (64 g/L) gr/lt
Typical DFTDepending on fire duration. Up to 4hrs
Drying time (25C)4 hrs
Drying time (10C)4 hrs
Drying time min. temp4
Min. application temp.50°F (10°C)
ChemistryPolysulfide epoxy

Downloads

Product nameDocument nameDocument typeLanguageDownload
PFP – Thermo-Lag 3000 SP – Intumescent hydrocarbon fire protection – Single leg airlessPDS Thermo-Lag 3000 SPProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “PFP – Thermo-Lag 3000 SP – Intumescent hydrocarbon fire protection – Single leg airless”

Your email address will not be published.