Substitute for Coal Tar based coatings
2 Component Epoxy Mastic
Carbomastic 18 NT is a heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility.
For NC and maintenance on immersion, and non immersion service on ships hull, ballast tanks, cofferdam and void spaces.
| Weight | N/A |
|---|---|
| Choose Packaging | |
| Pick Color | |
| Product type | |
| Coating, Lining or PFP | |
| Market Segment | |
| Brand | |
| Gloss Level | |
| Components | |
| Compatible with | 1 component, 2 component |
| Layer | |
| Substrate | Carbon Steel, Painted (1 component), Painted (2 component), Primed Steel |
| Solvent | |
| Industry | |
| Productivity - Low (*) to High (*****) | ** |
| Quality - Low (*) to High (*****) | ***** |
| UV resistance - Low (*) to High (*****) | |
| Surf Prep M&R | FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3 |
| Surf Prep New Steel | |
| End Use | Cargo Tank (alu), Cargo Tank (red), Deck, Flanks & Underwater Hull, Hull Immersion, Void spaces, Water Ballast Tank, Wet void spaces |
| Intended uses | For NC and maintenance on immersion, and non immersion service on ships hull, ballast tanks, cofferdam and void spaces. |
|---|---|
| Volume solids | 80% |
| Max. DFT | 500 µm |
| Min. DFT | 125 µm |
| Theor m2/lt at average DFT | 6,4 m2/lt |
| Typical DFT | 125 |
| Min. consumption brush/roller m2/lt | 6 m2/lt |
| Min. consumption spray m2/lt typical DFT | 4 m2/lt |
| Drying time (25C) | 7 hrs |
| Drying time (10C) | 18 hrs |
| Drying time min. temp | 26 |
| Min. application temp. | 5°C (41°F) |
| Chemistry | 2 Component Epoxy Mastic |
| Product name | Document name | Document type | Language | Download |
|---|
![Interswift 6800HS (20L) - 2 comp. - Antifouling - 20L, Black [packaging, color]](https://b3494200.smushcdn.com/3494200/wp-content/uploads/2021/08/20L-Interswift-6800HS-300x300.jpg?lossy=2&strip=1&webp=1)
Reviews
There are no reviews yet.