COATING SYSTEM – 1 COMPONENT ALKYD – GLOSS

SPECIFY THE DESIRED COLOUR CODE IN THE “NOTES” DURING CHECK OUT

Marine grade Alkyd

From  36,32 (incl. tax)

Color
  • Grey
  • Red
  • White
Size
-
+
From  65,41 (incl. tax)
Size
Color
  • RAL
-
+
From  79,94 (incl. tax)
Size
-
+
From  36,32 (incl. tax)
Size
-
+
From  41,85 (incl. tax)
QtyBrush/roller or spray?Max. surface
1 (5, 20Ll.)Min. consumption brush/roller: m2/lt0m2
1 (5, 20Ll.)Min. consumption spray typical DFT: m2/lt0m2

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminants such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

LayerProduct Name Generic TypeMix RatioMin. Temp.Dry time @ 25°Cm2/L brushm2/L sprayThinner
1st coatInterprime 1981  comp. alkyd primern/a-5°C1 hr4,923,28GTA007
2nd coatInterlac 6651 comp. alkyd topcoatn/a-5°C6 hrs10,87,2GTA004

Find the right application tools in the toolbox for solvent based coatings

Tips

  1. Do not apply or expose the paint below dew point, above 80% relative humidity, rain or temperatures below 10°C during application or drying.
  2. Apply a stripe coat by brush on sharp edges, cavities such as pitting corrosion, in corners and difficult areas to reach by spray

 

Always read the product technical data sheet and safety data sheet before using the coatings, to be found in the Download section.

 

Additional information

Weight25 kg
End use

Accommodation, Accomodation Interior, Bulwark, Deck, Engine room, Hatch Coaming, Living quarter

Brand

Industry

Marine Coatings

Gloss Level

High gloss

Components

Single pack

Compatible with

1 component, 2 component

Substrate

Carbon Steel, Painted (1 component), Painted (2 component), Primed Steel

ISO 12944 Durability

Medium

ISO 12944 Environment

C5

Budget - Low (*) to High (*****)

****

Productivity - Low (*) to High (*****)

**

Quality - Low (*) to High (*****)

***

Surf Prep M&R

FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Surf Prep New Steel

Sa2, Sa2.5

UV resistance - Low (*) to High (*****)

*****

Systems

Bullwark, Deck, Hatch Coaming, Hull – Above waterline, Living quarters

Detailed information about COATING SYSTEM – 1 COMPONENT ALKYD – GLOSS

Intended usesOn Board Maintenace above the waterline in colour
Min. DFT90 µm
Typical DFT150 micr. DFT
ChemistryMarine grade Alkyd

Downloads

Product nameDocument nameDocument typeLanguageDownload
COATING SYSTEM – 1 COMPONENT ALKYD – GLOSSPDS Interlac 665Product Data SheetEnglish Download
COATING SYSTEM – 1 COMPONENT ALKYD – GLOSSPDS Interprime 198Product Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – 1 COMPONENT ALKYD – GLOSS”

Your email address will not be published.