COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT

SPECIFY THE DESIRED COLOUR CODE IN THE “NOTES” DURING CHECK OUT

Moisture Tolerant Epoxy

Choose Packaging
Pick Color
  • Dawn Grey
  • Yelllow Green
-
+
Choose Packaging
-
+
Choose Packaging
Pick your Color Group
  • Stdd. White
  • Cat. White / Beige
  • Cat. Yellow
  • Cat. Orange
  • Cat. Red
  • Cat. Violet
  • Cat. Blue
  • Cat. Green
  • Cat. Grey
  • Cat. Brown
  • Cat. Black
-
+

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminents such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

Layer Product Name  Generic Type Mix Ratio Min. Temp. Dry time @ 25°C m2/L brush m2/L spray Thinner
1st coat Intergard 5000 2  comp. epoxy primer 16 : 4 5°C 7 hrs 4,92 3,28 GTA220
2nd coat Intergard 740 2 comp. epoxy colour 16 : 4 10°C 16 hrs 9,20 6,12 GTA220

Find the right application tools in the toolbox for solvent based coatings

Additional information

Weight 25 kg
End Use

Brand

Industry

Pick Color

,

Components

Compatible with

2 component

Substrate

, ,

Budget - Low (*) to High (*****)

***

Productivity - Low (*) to High (*****)

***

Quality - Low (*) to High (*****)

*****

Surf Prep M&R

, , , , ,

Surf Prep New Steel

,

UV resistance - Low (*) to High (*****)

****

Coating, Lining or PFP

Coating

Market Segment

Solvent

Layer

, ,

Product type

,

Detailed information about COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT

Intended usesBilges
Volume solids82%
VOC259 g/lt as supplied (EPA Method 24) gr/lt
Max. DFT300 µm
Min. DFT125 µm
Theor m2/lt at average DFT5.47 m2/lt
Typical DFT150 Micr. DFT
Min. consumption brush/roller m2/lt5 m2/lt
Min. consumption spray m2/lt typical DFT3.3 m2/lt
Drying time (25C)8 hrs
Drying time (10C)16 hrs
Drying time min. temp36
Min. application temp.5°C
ChemistryMoisture Tolerant Epoxy

Downloads

Product name Document name Document type Language Download
COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT PDS Intergard 5000 Download
COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT PDS Intergard 740 Download
COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – BILGES – 2 COMPONENT EPOXY – MOISTURE TOLERANT”

Your email address will not be published. Required fields are marked *

Need Help?