COATING SYSTEM – HULL – “One Pot One Layer” – 2 Component Epoxy


Modified Epoxy

From  6,26 (incl. tax)

  • Aluminium Grey
  • Black
  • Colorcode
  • Red Oxide
From  125,24 (incl. tax)
  • Dawn Grey
  • Yew Green
 87,24 (incl. tax)
From  6,26 (incl. tax)
From  7,30 (incl. tax)
 110,94 (incl. tax)
(Use Intergard 5000 BG for Brush & Roller Application. Two coats may be needed to reach same DFT as single coat spray)


Interzone 954 is a one pot one layer system with over 35 years proven track record. It is one of the best selling products of International Paint worldwide. Applied in a single coat of typically 500micron, it has a very high proven durability in Offshore environments.

Interzone 954 is a highly impact-, abrasion- and chemical resistant coating, with exceptional surface tolerance applied directly over tight rust.

The unique binder technology allows for application over damp subtrates, as well as immersion or exposure to rain or dew only 20-30min. after application.

Interzone 954 is easy to apply by airless spray. Interzone 954 brush grade is for brush and roller application.

Interzone 954 has low VOC levels, and in combination with the long term performance and high quality assurance can be considered as a highly sustainable solution.



Additional information

Weight 30 kg


Multi pack


Primer, Primer/finish, Steel Primer


Carbon Steel, Painted (2 component), Primed Steel

Compatible with

2 component

End use

Flanks & Underwater Hull, Hull Immersion, Topside

ISO 12944 Durability

Very High

ISO 12944 Environment

C4, C5, Cx

Max operating temp


Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


Surf Prep M&R

FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Surf Prep New Steel

Sa2, Sa2.5, Sa3

UV resistance - Low (*) to High (*****)


Budget - Low (*) to High (*****)



Marine Coatings


Hull – Above waterline, Hull – Below waterline

Detailed information about COATING SYSTEM – HULL – “One Pot One Layer” – 2 Component Epoxy

Intended usesUnderwater Hull & Flanks. Can also be used on decks with aggregate, and inside cargot tanks, water ballast tanks and cofferdams.
Volume solids85%
VOC225 gr/lt gr/lt
Max. DFT500 micr. DFT µm
Min. DFT250 micr. DFT µm
Theor m2/lt at average DFT2.42 m2/lt
Typical DFT350 micr. DFT
Min. consumption brush/roller m2/lt2.17 m2/lt
Min. consumption spray m2/lt typical DFT1.7 m2/lt
Drying time (25C)5.5 hrs hrs
Drying time (10C)16 hrs hrs
Drying time min. temp48hr at -5°C
Min. application temp.-5°C
Max. operating temp.120°C Dry
ChemistryModified Epoxy


Product name Document name Document type Language Download
COATING SYSTEM – HULL – “One Pot One Layer” – 2 Component Epoxy PDS Interzone 954 Product Data Sheet English Download
COATING SYSTEM – HULL – “One Pot One Layer” – 2 Component Epoxy MSDS Interzone 954 MSDS English Download


There are no reviews yet.

Be the first to review “COATING SYSTEM – HULL – “One Pot One Layer” – 2 Component Epoxy”

Your email address will not be published.