Thermaline 4001 / Heatshield – High Temp resistant coating

This is an extreme performance coating for hot, cryogenic and cycling exposures.

Reinforced inorganic polymer (inert multi-polymeric matrix)

From  302,50 (incl. tax)


QtyBrush/roller or spray?Max. surface
1 (5l, 20l.)Min. consumption brush/roller: 5,2 m2/lt25m2
1 (5l, 20l.)Min. consumption spray typical DFT: 3,4 m2/lt15m2

Description

This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).

Additional information

WeightN/A
Brand

Coating, Lining or PFP

Coating

Components

2

Compatible with

2 component

Solvent

Solvent Based

Industry

Industrial Coatings

Market Segment

O&G Midstream, Oil & Gas Upstream, Petrochemical, Power – Nuclear, Power – Thermal Fuel, Pulp & Paper

Layer

Primer/finish, Steel Primer

Color

,

Substrate

Carbon Steel, Primed Steel

Packaging

20L, 5L

Product type

End use

Insulated & Uninsulated Piping & Equipment, Insulated internal surfaces, Valves

Detailed information about Thermaline 4001 / Heatshield – High Temp resistant coating

Intended usesThis versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels.
Volume solids51%
VOCAs Supplied : 3.5 lbs/gal (420 g/l) gr/lt
Max. DFT125 µm
Min. DFT90 µm
Theor m2/lt at average DFT5,7 m2/lt
Typical DFT90
Min. consumption brush/roller m2/lt5,2 m2/lt
Min. consumption spray m2/lt typical DFT3,4 m2/lt
Drying time (25C)1 hrs
Drying time (10C)6 hrs
Drying time min. temp6
Min. application temp.50°F (10°C)
ChemistryReinforced inorganic polymer (inert multi-polymeric matrix)

Downloads

Product nameDocument nameDocument typeLanguageDownload
Thermaline 4001 / Heatshield – High Temp resistant coatingPDS Thermaline Heat ShieldProduct Data SheetEnglish Download

Reviews

There are no reviews yet.

Be the first to review “Thermaline 4001 / Heatshield – High Temp resistant coating”

Your email address will not be published.