SYSTEM – Underwater Hull + Flanks – “One Pot One Layer” – Epoxy Coating System

LONG DURABILITY IN “1 LAYER 1 POT” SYSTEM

Modified Epoxy

From  546,71 (incl. tax)

Color
  • Black
  • Grey
  • Ral 1000/7000/9000 Black / White / Gray
  • RAL 2000/3000/4000 Yellow / Red / Purple
  • RAL 5000/6000 Blue / Green / Signal
  • White
Size
From  348,78 (incl. tax)
Color
  • Aluminium, first coat
  • Black
  • Buff
 81,34 (incl. tax)
Size
From  1,34
(Use Intergard 5000 BG for Brush & Roller Application. Two coats may be needed to reach same DFT as single coat spray)
Discount Units Price per product
15% 5 - 10  466,27
10% 2 - 5  493,70

From  546,71 (incl. tax)

  • Delivered within 2 days.
  • Free shipping on orders above € 250,-.
Qty Brush/roller or spray? Max. surface
1 (20 L, 5L (Brush grade)l.) Min. consumption brush/roller: 2.17 m2/lt 43.4m2
1 (20 L, 5L (Brush grade)l.) Min. consumption spray typical DFT: 1.7 m2/lt 34m2

Description

Interzone 954 is a one pot one layer system with over 35 years proven track record. It is one of the best selling products of International Paint worldwide. Applied in a single coat of typically 500micron, it has a very high proven durability in Offshore environments.

Interzone 954 is a highly impact-, abrasion- and chemical resistant coating, with exceptional surface tolerance applied directly over tight rust.

The unique binder technology allows for application over damp subtrates, as well as immersion or exposure to rain or dew only 20-30min. after application.

Interzone 954 is easy to apply by airless spray. Interzone 954 brush grade is for brush and roller application.

Interzone 954 has low VOC levels, and in combination with the long term performance and high quality assurance can be considered as a highly sustainable solution.

 

 

Additional information

Product type

, , , , , , ,

Brand

Components

Multi pack

Layer

Primer, Primer/finish, Steel Primer

Substrate

Carbon Steel, Painted (2 component)

Compatible with

2 component

End use

Cargo Tank (alu), Cargo Tank (red), Deck & topside, Flanks & Underwater Hull, Hull immersion Anti Fouling, Hull immersion no AF, Water Ballast Tank

ISO 12944 Durability

Very High

ISO 12944 Environment

C4, C5, Cx

Max operating temp

120ºC

Productivity - Low (*) to High (*****)

*****

Quality - Low (*) to High (*****)

*****

Surf Prep M&R

FR Sa2.5, Solvent Clean SSPC-SP1, SP11, Spot Sa2+Sa1, Spot WJ2+WJ4, St2/St3

Surf Prep New Steel

Sa2, Sa2.5, Sa3

UV resistance - Low (*) to High (*****)

***

Budget - Low (*) to High (*****)

***

Detailed information about SYSTEM – Underwater Hull + Flanks – “One Pot One Layer” – Epoxy Coating System

Intended usesUnderwater Hull & Flanks. Can also be used on decks with aggregate, and inside cargot tanks, water ballast tanks and cofferdams.
Volume20 L, 5L (Brush grade)
Volume solids85%
VOC225 gr/lt gr/lt
Max. DFT500 micr. DFT µm
Min. DFT250 micr. DFT µm
Theor m2/lt at average DFT2.42 m2/lt
Typical DFT350 micr. DFT
Min. consumption brush/roller m2/lt2.17 m2/lt
Min. consumption spray m2/lt typical DFT1.7 m2/lt
Drying time (25C)5.5 hrs hrs
Drying time (10C)16 hrs hrs
Drying time min. temp48hr at -5°C
Min. application temp.-5°C
Max. operating temp.120°C Dry
ChemistryModified Epoxy

Downloads

Product name Document name Document type Document language Document download
SYSTEM – Underwater Hull + Flanks – “One Pot One Layer” – Epoxy Coating System PDS Interzone 954 Product Data Sheet English Download
SYSTEM – Underwater Hull + Flanks – “One Pot One Layer” – Epoxy Coating System MSDS Interzone 954 MSDS English Download

Reviews

There are no reviews yet.

Be the first to review “SYSTEM – Underwater Hull + Flanks – “One Pot One Layer” – Epoxy Coating System”

Your email address will not be published. Required fields are marked *